Hi all,

This is the error
--------------------------------
U-Boot 2010.06 (ADI-2010R1-pre) (Jan 08 2011 - 14:09:20)

CPU:   ADSP bf532-0.5 (Detected Rev: 0.6) (spi flash boot)
Board: IPPBX IP0x
Clock: VCO: 400 MHz, Core: 400 MHz, System: 133.333 MHz
RAM:   64 MiB
NAND:  256 MiB
SF: Detected W25X40 with page size 256, total 512 KiB
In:    serial
Out:   serial
Err:   serial
Net:   dm9000
starting from spi flash
Hit any key to stop autoboot:  0

NAND read: mtdparts variable not set, see 'help mtdparts'
incorrect device type in kernel
'kernel' is not a number
Wrong Image Format for bootm command
ERROR: can't get kernel image!

------------------------------------
This is print log

ip0x> print
bootcmd=run nandboot
bootdelay=3
baudrate=115200
loads_echo=1
autoload=no
preboot=echo starting from spi flash
rootpath=/romfs
netmask=255.255.255.0
hostname=IP0x
nandboot=run setbootargs; nand read.e 0x2000000 kernel; bootm 0x2000000
ethaddr=aa:80:8f:c1:c1:d9
ethact=dm9000
mtdids=nand0=ip0x-nand
ipaddr=192.168.0.101
serverip=192.168.0.23
gatewayip=192.168.0.1
setbootargs=setenv bootargs eth0addr=00:09:45:5b:a2:b7 eth1addr=00:09:45:5b:a2:09 console=ttyBF0,115200
flashboot=nand read 0x2000000 0x0 0x700000
loadaddr=0x2000000
autostart=yes
stdin=serial
stdout=serial
stderr=serial
bootargs=eth0addr=00:09:45:5b:a2:b7 eth1addr=00:09:45:5b:a2:09 console=ttyBF0,115200

Environment size: 669/65532 bytes
ip0x>
------------------------------

Any idea about this?

Thanks