I've been working through trying to get a working image compiled on an Ubuntu 10.04 system. Image compiles fine, flashes onto IP02 without problems and presents running dropbear and GUI. However, asterisk fails to load any modules, I am unable to reboot or flash the device through the GUI and get a number of strange errors regarding write failures and broken pipes.

lukeman was able to provide an image for me that works, so I began a comparison of the configuration files to see what might be the difference.

One of the only differences found was that in build_ip04/uClinux-dist/linux-2.6.x/.config

My compile is setting the following, my setting in the first block of the diff. luckman's in the second block.


***************
*** 210,216 ****
  #
  CONFIG_CLKIN_HZ=10000000
  # CONFIG_BFIN_KERNEL_CLOCK is not set
! CONFIG_MAX_VCO_HZ=400000000
  CONFIG_MIN_VCO_HZ=50000000
  CONFIG_MAX_SCLK_HZ=133333333
  CONFIG_MIN_SCLK_HZ=27000000
--- 211,217 ----
  #
  CONFIG_CLKIN_HZ=10000000
  # CONFIG_BFIN_KERNEL_CLOCK is not set
! CONFIG_MAX_VCO_HZ=750000000
  CONFIG_MIN_VCO_HZ=50000000
  CONFIG_MAX_SCLK_HZ=133333333
  CONFIG_MIN_SCLK_HZ=27000000

Now I am currently configured to build for BF532 and Revision 0.6, but I have tried it with defaults of BF533 as well.

Any idea if this would create the behavior I am seeing?