Home Forum Developers PR1 Appliance Upgrading DAHDI in PR1 Appliance

JRPassphrase Registration Control

In order to register on this site, you must first submit the passphrase below.

TODO list for each hardware target can be found as sticky topic in the corresponding forum


Amber_Sarosh
useravatar
User Info

Upgrading DAHDI in PR1 Appliance

Hi All,
We are trying to interface this appliance with an ISDN PBX. Once the connections are made, the alarm on the GUI is shown OK, but still on the asterisk CLI the PRI span is shown as Provisioned,Down,Active. Also, the intense debug shows that the execution of Q921 events is fine till state 4(TEI Assigned), but state 5(Awaiting Establishment)is being unsuccessful and the timer T200 expires repeatedly.

I have seen on many forums that the problem can be resolved by upgrading the asterisk and DAHDI version in the firmware. Regarding this, we have tried  compiling a uImage with asterisk 1.8 and asterisk 1.6 both from the switchfin source code, but errors are seen during compilation. In this menu, we could not find any choice of versions for DAHDI. Moreover, if we attempt to recompile the DAHDI on the board after downloading and extracting the DAHDI 2.6 source code, it shows error of low disk space.

Is there anyone who has been successful in upgrading DAHDI on PR1 appliance? If so , please guide how? Moreover, do inform if there is any other solution you can suggest about the PRI span errors I have stated above.


Administrator has disabled public posting

Board Info

Board Stats:   Total Users: 2587  Total Topics: 299  Total Polls: 1  Total Posts: 1727  Dormant
User Info:   Newest User :  user2553   Members Online: 0   Guests Online: 379
Online  There are no members online
Topic
New
Locked
Topic
New
Locked
Sticky
Active
New/Active
Sticky
Active
New/Active
New/Closed
New Sticky
Closed/Active
New/Locked
New Sticky
Locked/Active
Active/Sticky
Sticky/Locked
Sticky Active Locked
Active/Sticky
Sticky/Locked
Sticky/Active/Locked