FX08 down? No panic…………..

You can load the uImage manually using u-boot
________________________________________________
fx08>set ipaddr 192.168.0.100
fx08>set serverip 192.168.0.23
fx08>set gatewayip 192.168.0.1
fx08>set netmask 255.255.255.0
fx08>set autostart no
fx08>set bootcmd run flashboot
fx08>set bootargs 'ethaddr=00:16:D3:2A:C5:78 ethaddr1=00:16:D3:2A:C5:B9 root=/dev/mtdblock0 rw console=ttyBF0'
fx08>set flashboot nand read 0x1000000 0x0 0x9c0000\;run addnet\;bootm 0x1000000
fx08>save

fx08>tftp 0x1000000 uImage

nand erase clean
nand erase
nand write 0x1000000 0x0 0x9c0000
reset
______________________________________________

First i have load atcom ext2 image … later load from gui Switchvoice  uImage-ip02-ip08-v509gsm.img

(uImage-ip02-ip08-v624.img is not correct for me becouse write in 0x20020000)

With original FXO Digium card my system crash.

Thanks to  Dimitar – Chewi - Nunne