Home Forum Developers IP0x Uimage.ext2 or uImage ?

JRPassphrase Registration Control

In order to register on this site, you must first submit the passphrase below.

TODO list for each hardware target can be found as sticky topic in the corresponding forum

Page:   1 

1  Top
Jun-11-10 17:12:35
serenissimo
useravatar
User Info

Uimage.ext2 or uImage ?

Hi
which is the difference between uImage.ext2 and uImage compiled  from the switchfin SVN ?
I tried to install uImage.ext2 in IP02 and it's works inserting the corret exadecimal address but this not work with uImage .

Let's me know

regards

Administrator has disabled public posting
2  Top
Jun-12-10 18:43:53
admin
useravatar
User Info

Re: Uimage.ext2 or uImage ?

Hi serenissimo,
Please take a look at the following link:
http://docs.blackfin.uclinux.org/doku.p … ages&s[]=uimage&s[]=ext2

uImage-md5 is uImage with 32 bytes check sum attached at the end. (so the GUI update is more secure) uImage-md5 can be used from the GUI HTTP/TFTP update
If you would like to reflash the software from u-boot you still can use uImage-md5 but the last 32(0x20) bytes should not be written in the NAND flash.

Best Regards
Dimitar

Administrator has disabled public posting
Page:   1 

Board Info

Board Stats:   Total Users: 2587  Total Topics: 299  Total Polls: 1  Total Posts: 1727  Dormant
User Info:   Newest User :  user2553   Members Online: 0   Guests Online: 215
Online  There are no members online
Topic
New
Locked
Topic
New
Locked
Sticky
Active
New/Active
Sticky
Active
New/Active
New/Closed
New Sticky
Closed/Active
New/Locked
New Sticky
Locked/Active
Active/Sticky
Sticky/Locked
Sticky Active Locked
Active/Sticky
Sticky/Locked
Sticky/Active/Locked